bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples package

Submodules

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e10_openfoam_furniture module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e10_openfoam_furniture.run_example_8()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e10_openfoam_furniture_DH module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e10_openfoam_furniture_DH.run_example_8()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e10_openfoam_no_heating module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e10_openfoam_no_heating.run_example_10()

Prepare an OpenFOAM case with ventilation and zero gradient heatflux.

This example runs a BPS with the EnergyPlus backend and a CFD simulation with the OpenFOAM backend. It specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

The EnergyPlus simulation is followed by the setup of the OpenFOAM CFD use case, which bases on the same IFC input as the previously set up EnergyPlus use case.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e11_openfoam_furniture_space_heater module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e11_openfoam_furniture_space_heater.run_example_11()

Prepare an OpenFOAM case with ventilation and a radiator including meshing and running the simulation on linux.

This example runs a BPS with the EnergyPlus backend and a CFD simulation with the OpenFOAM backend. It specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

The EnergyPlus simulation is followed by the setup of the OpenFOAM CFD use case, which bases on the same IFC input as the previously set up EnergyPlus use case.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e11_openfoam_run_full_sim_linux module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e11_openfoam_run_full_sim_linux.run_example_11()

Prepare an OpenFOAM case with ventilation and a radiator including meshing and running the simulation on linux.

This example runs a BPS with the EnergyPlus backend and a CFD simulation with the OpenFOAM backend. It specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

The EnergyPlus simulation is followed by the setup of the OpenFOAM CFD use case, which bases on the same IFC input as the previously set up EnergyPlus use case.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e12_openfoam_auto_refinement module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e12_openfoam_auto_refinement.run_example_12()

Prepare an OpenFOAM case with ventilation and a radiator including automatic refinement adjustments.

This example runs a BPS with the EnergyPlus backend and a CFD simulation with the OpenFOAM backend. It specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

The EnergyPlus simulation is followed by the setup of the OpenFOAM CFD use case, which bases on the same IFC input as the previously set up EnergyPlus use case.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e12_run_openfoam_preconditioned_transient module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e12_run_openfoam_preconditioned_transient.run_example_12()

OpenFOAM simulation, run a preconditioned transient simulation.

Prepare an OpenFOAM case with ventilation and a radiator including meshing and running the simulation on linux. This example runs a BPS with the EnergyPlus backend and a CFD simulation with the OpenFOAM backend. It specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

The EnergyPlus simulation is followed by the setup of the OpenFOAM CFD use case, which bases on the same IFC input as the previously set up EnergyPlus use case.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e13_run_openfoam_fvDOM module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e13_run_openfoam_fvDOM.run_example_13()

OpenFOAM simulation, run a preconditioned transient simulation.

Prepare an OpenFOAM case with ventilation and a radiator including meshing and running the simulation on linux. This example runs a BPS with the EnergyPlus backend and a CFD simulation with the OpenFOAM backend. It specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

The EnergyPlus simulation is followed by the setup of the OpenFOAM CFD use case, which bases on the same IFC input as the previously set up EnergyPlus use case.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e16_openfoam_import_IFC-HVAC module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e17_openfoam_import_IFC-HVAC_multi_files module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e18_openfoam_import_IFC-HVAC_multi_overflow module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e1_simple_project_cfd_openfoam module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e1_simple_project_cfd_openfoam.run_example_1()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e2_complex_project_bps_comfort_journal module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e2_complex_project_bps_comfort_journal.run_example_complex_building_openfoam()

Run a building performance simulation with the energyplus backend.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e2_openfoam_floorheating_steady module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e2_openfoam_floorheating_steady.run_example_2()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e3_openfoam_radiator_steady module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e3_openfoam_radiator_steady.run_example_3()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e4_openfoam_radiator_steady_r0 module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e4_openfoam_radiator_steady_r0.run_example_3()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e5_openfoam_radiator_steady_r1 module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e5_openfoam_radiator_steady_r1.run_example_5()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e6_openfoam_radiator_steady_simple_air module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e6_openfoam_radiator_steady_simple_air.run_example_6()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e7_openfoam_radiator_steady_diffusor module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e7_openfoam_radiator_steady_diffusor.run_example_7()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e8_openfoam_radiator_steady_simple_air_none module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e8_openfoam_radiator_steady_simple_air_none.run_example_8()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e9_openfoam_radiator_steady_simple_stldiffusor module

bim2sim.plugins.PluginOpenFOAM.bim2sim_openfoam.examples.e9_openfoam_radiator_steady_simple_stldiffusor.run_example_8()

Run a building performance simulation with the EnergyPlus backend.

This example runs a BPS with the EnergyPlus backend. Specifies project directory and location of the IFC file. Then, it creates a bim2sim project with the EnergyPlus backend. Simulation settings are specified (EnergyPlus location needs to be specified according to your system, other settings are set to default if not specified otherwise), before the project is executed with the previously specified settings.